材质:不锈钢 | 品牌:德国洛克 | 连接形式:法兰 |
驱动方式:手动、电动、气动 | 介质温度:≤300℃℃℃ | 工作压差:1.0~1.6Mpa |
型号:DE LOCKE | 产品别名:刀型闸阀 | 适用范围:电站、冶金、建筑、锅炉、设备、管道、热能、空调、消防、给排水、水处理、石油化工、造纸印刷厂。 |
流动方向:双向 | 用途:截止 | 适用介质:水 |
压力环境:常压 | 规格:中型 | 产品特性:截止 |
类型(通道位置):二通式 |
进口双重双向密封刀闸阀德国洛克LOCKE产品图片
产品概述:
德国《DE LOCKE》洛克进口双重双向密封刀闸阀又称无凹槽刀闸阀,铸钢和不锈钢阀体采用2体式结构刀闸阀,包括阀体,闸板和U型密封条,阀体左右两侧及中腔底部设有凹槽并装有弹性U型密封条,当阀门关闭时闸板下移,闸板底部与密封条接触进而压缩密封条进入凹槽中实现阀体和闸板的密封;当刀闸阀开启时闸板上移,闸板底部边缘与密封条脱离,密封条弹起与凹槽平整,阀体带刮片设计能防止刀闸阀在使用过程中,介质沉淀物积存在阀体中腔的凹槽里,不易堵塞、无残liu,管道清洗方便,从而有效提高刀闸阀的密封效果,防止阀门关闭时泄漏。
Product overview:
The double two-way sealing knife gate valve imported from Germany de lock is also called grooveless knife gate valve. The cast steel and stainless steel valve bodies adopt 2-body structure knife gate valve, including valve body, gate and U-shaped sealing strip. Grooves and elastic U-shaped sealing strips are set on the left and right sides of the valve body and the bottom of the middle cavity. When the valve is closed, the gate moves down, The bottom of the ram is in contact with the sealing strip, and then the sealing strip is compressed into the groove to realize the sealing of the valve body and the ram; When the knife gate valve is opened, the ram moves upward, the bottom edge of the ram is separated from the sealing strip, the sealing strip bounces up and the groove is flat. The valve body is equipped with a scraper design, which can prevent the medium sediment from accumulating in the groove in the middle cavity of the valve body during the use of the knife gate valve, which is not easy to be blocked and has no residue. The pipeline is easy to clean, so as to effectively improve the sealing effect of the knife gate valve and prevent leakage when the valve is closed.
产品性能:
1、公称压力:PN1.0~1.6Mpa
2、通径范围:DN50~DN1400
3、连接形式:对夹;法兰
4、传动机构:手轮,涡轮,气动,电装,液动,电液动,链轮盘
5、主要材质:WCB,CF8,CF8M
6、闸板材质:F55, F53,2205, SS310, SS316L,SS316, SS304
7、密封材质:NBR, EPDM
8、填料密封:芳纶,高水机,四氟,橡胶,石墨
9、适用介质:适用于矿山电厂的选煤、排渣、食品、造纸、医药、化工等管路上,接通或截断管路中的水泥浆、金矿粉、矿砂、炉渣、煤泥、纸浆、木浆、尾矿、纤维、粉尘、化学品处理污水、沉淀池、沥青、料仓出口等介质。
产品特点:
1、U型阀座密封圈设计;
2、2体式阀体设计;
3、带PTFE刮片式阀体,有效防止阀门开启时的流体上行;
4、二体式新xing支架,增加了支架的强度;
5、无凹槽设计,防止流体滞留在阀腔内;
6、DN50-DN550一体式阀座密封圈,大于DN600为2体式阀座密封圈。
产品业绩:
1、上海纺织(集团)有限公司
2、徐州盛泉洗煤厂
3、浙江华都纺织集团有限公司
4、恒安集团
5、金东纸业有限公司
6、山东晨鸣纸业集团股份有限公司
7、潍坊砂矿有限公司
8、华东有色尾矿公司
9、福建建阳祥康织造有限公司
10、介休市晋强洗煤设备制造有限公司
11、微山县汇永煤炭洗选有限公司
12、山西临汾如意洗煤有限公司
13、西湖洗煤厂
14、山东洗煤厂
产品安装:
1、安装前须检查阀门腔内和密封面等部位,不允许有污物或砂粒附着;
2、各连接部位螺栓,要求均匀拧紧;
3、检查填料部位要求压紧,既***填料的密封性,也要***闸板开启灵活;
4、用户在安装阀门前,必须校对阀门型号,连接尺寸及注意介质流向,***与阀门要求一致性;
5、用户在安装阀门时,必须预留阀门驱动的必要空间;
6、驱动装置的接线须按线路图进行;
7、气动对夹刀闸阀必须定期保养,不得随意碰撞及挤压,以免影响密封。