品牌:美国莱恩 | 型号:LAINE | 材质:碳钢 |
连接形式:法兰 | 3C阀门类别:工业 | 适用介质:水 |
流动方向:单向 | 用途:换向 | 公称通径:DN15~300mmmm |
工作温度:-20~+550℃℃℃ | 位置数:2 | 使用压力:0.1~6.4mpampa |
有效截面积:3mm?mm? | 动作方式:直动式 | 最高动作频率:100万次 |
规格:中型 | 规格1:大型 | 产品特性:开关 |
类型(通道位置):二通式 |
进口高温导热油电磁阀美国《LAINE》莱恩产品介绍
进口高温导热油电磁阀产品优势:
nai高温电磁阀阀芯均为不锈活塞式,活塞环用特殊耐温、nai磨材料制作;活塞与金属阀腔不产生直接摩擦,阀体安装方向随意;定制线圈,并采用散热的结构方式,因此不易烧毁;大大增加使用寿命、长时间停止动作重新启动,动作同样灵敏。
1、不同的使用介质,采用针对性的密封,更加提高电磁阀使用性
2、采用新颖巧妙的阀芯结构及安装散热装置,使结构更加紧凑
3、介质流体工作压力可分别为06Mpa、10Mpa25Mpa40Mpa50Mpa、10Mpa、15Mpa等
4、高温电磁阀采用不锈钢活塞结构,阀芯不会直接摩擦,更加提高电磁阀的寿命和可靠性,可持续频繁工作
5、特殊场合可持续长时间通电,采用金属硬密封,介质流体温度可达650℃
Advantages of imported high temperature heat transfer oil solenoid valve products:
The valve core of high temperature resistant solenoid valve is stainless piston type, and the piston ring is made of special temperature resistant and wear-resistant materials; There is no direct friction between the piston and the metal valve chamber, and the installation direction of the valve body is arbitrary; Custom coil and heat dissipation structure are adopted, so it is not easy to burn; Greatly increase the service life, stop and restart for a long time, and the action is also sensitive.
1. Different media are used and targeted sealing is adopted to further improve the usability of solenoid valve
2. The novel and ingenious valve core structure and heat dissipation device are adopted to make the structure more compact
3. The working pressure of medium fluid can be 06mpa, 10mpa25mpa40mpa50mpa, 10MPa, 15MPa, etc
4. The high temperature solenoid valve adopts stainless steel piston structure, and the valve core will not be directly rubbed, which further improves the service life and reliability of the solenoid valve and can work continuously and frequently
5. It can be powered on for a long time in special occasions, adopts metal hard seal, and the medium fluid temperature can reach 650 ℃
进口高温导热油电磁阀产品描述:
美国《LAINE》莱恩--进口高温导热油电磁阀应用于各种中温场合、高温场合,如:高温蒸汽系统、过热蒸汽控制、 导热油控制、干燥设备、供热系统、工业石油供用系统、石化设备、过滤设备系统等,温电磁阀适用于中高温热水、导热油、硅油、高温蒸汽、饱和蒸汽及过热蒸汽等管路的自动控制,使用介质温度可达650℃。
进口高温导热油电磁阀工作原理:
常闭:当线圈通电时,电磁铁芯吸合,卸压孔打开,主活塞由介质压力推动,打开主阀口,介质流通。
当线圈断电时,主阀口关闭,介质截止。
常开:当线圈通电时,电磁铁芯吸合,卸压孔关闭,主活塞由介质压力推动,关闭主阀口,介质截止。
当线圈断电时,主阀口打开,介质流通。
进口高温导热油电磁阀性能参数:
公称通径DN15~300mm
原理结构先导活塞式
环境温度-10~+50℃-40~+80℃
线圈温度<+50℃lt;+85℃
控制方式常闭、常开、自保持
公称压力0.1~6.4Mpa
阀体材质铸钢、不锈钢304、316
适用介质导热油、石油、燃气、油、重油、等腐蚀流体等
介质温度-20~+550℃
介质粘度小于50CSt(大于50时需定制)
防护性能防水、防尘、防爆(Exd IICT5)、防腐
阀芯材质均为不锈钢
接线方式接线座式、引线式、插头式
电源电压DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V;
AC24V、AC36、AC110V、AC127V、AC220V、AC380V
连接方式法兰、内螺纹、外螺纹、卡套、焊接
泄 漏 量零泄漏
备注特殊型可定制
关于我们:
美国莱恩自控集团(USA LAINE CONTROLS GROUP)座落在美国东岸的华盛顿特区,莱恩公司自成立以来始终将产品质量和技术作为公司发展的基础,一直积力于服务客户,并提供完善的阀门及流体自控系统的产品和解决方案。目前是此领域制造商之一。
公司主要生产销售莱恩自控集团的调节阀、减压阀、闸阀、截止阀、蝶阀、止回阀、球阀、疏水阀、隔膜阀以及一系列完型设计的辅助设备,包括电动、气动执行机构、电磁阀、阀门位置检测器等。产品多年来销往世界各地,获得海内外客户。
我司生产产品一直坚持莱恩统一的质量水准,坚持产品的一致规格。莱恩在中国地区已建有销售服务网络,方便为客户提供各种售前服务。