进口自来水过滤器品牌德国LOCKE洛克产品图片

进口自来水过滤器产品特点：

1.进口自来水过滤器在使用一段时间后，需要取下内部的过滤网进行清洗，以免被过滤的杂  质堵在过滤网上增加了液体阻力，影响系统水的正常流通，一般每3个月清洗一次过滤网 为佳；

2.清洗后的过滤网在安装回进口自来水过滤器后，注意观察进口自来水过滤器垫片是否有漏   水情况发生，如果发现渗漏，及时更换密封垫片；

3.新系统安装进口自来水过滤器几小时后要及时清洗滤网，以防管道安装时残留在管道内的   施工垃圾堵塞进口自来水过滤器；

4.用于不经常流动的系统的进口自来水过滤器要特别注意卫生问题，系统超过4天不运行，   进口自来水过滤器过滤网上就容易滋生细菌，要注意及时清洗过滤网。

Features of imported tap water filter:

1. After the imported tap water filter is used for a period of time, the internal filter screen needs to be removed for cleaning to avoid being blocked by the filtered impurities on the filter screen, which increases the liquid resistance and affects the normal flow of system water. Generally, it is better to clean the filter screen every 3 months;

2. After the cleaned filter screen is installed back into the inlet tap water filter, pay attention to observe whether the gasket of the inlet tap water filter has water leakage. If leakage is found, replace the sealing gasket in time;

3. The filter screen shall be cleaned in a few hours after the installation of the imported tap water filter in the new system to prevent the construction waste remaining in the pipeline from blocking the imported tap water filter during pipeline installation;

4. For the imported tap water filter used in the system that does not flow frequently, special attention shall be paid to the hygiene problem. If the system does not operate for more than 4 days, the filter screen of the imported tap water filter is easy to breed bacteria. Pay attention to cleaning the filter screen in time.

进口自来水过滤器性能范围：

公称通径 DN15～DN500

公称压力 1.6～32Mpa  300PSI～5000PSI

适用温度 -40℃≈500℃ 

驱动方式 自力式

连接方式 螺纹、法兰、焊接

结构形式 Y型、T型、U型、一字型

阀体材质 铸铁、球墨铸铁、铸钢、碳钢、不锈钢

适用介质 自来水等。

制造标准 德国洛克原厂标准

应用场合 电站、冶金、建筑、锅炉、设备、管道、热能、空调、消防、给排水、水处理、石油化工、造纸印刷厂。